Product Information

TES Spray Type Wet Scrubber

TES: Spray Type Wet Scrubber have the following design features:

  • The wet spray scrubber can handle a variety of harmful gases.
  • Gas is handled by direct contact between the gas and the circulating liquid.
  • The scrubber and ventilator are made of FRP, which has superior anti-corrosive properties. (the circulating pump is made of PP or PVDF)
  • Easy selection of models by airflow range due to diameter standardization.

Spray type wet scrubbers can handle a variety of harmful gases.

  • The scrubber and ventilator are made of FRP, which has superior anti-corrosive properties. (the circulating pump is made of PP or PVDF)
  • Diameter standardization enables easy selection of models by airflow range

Features:
Gas is handled by direct contact between the gas and the circulating liquid

  • A special nozzle increases liquid-vapor contact efficiency, which enables handling of a wide range of gases, including those containing particulates.
  • these effects result in highly efficient removal.
  • Capable of long-term continuous operation.

Reduced maintenance

  • Since there is no filler, there is less to maintain.
  • Fewer replacement parts means a reduced maintenance cycle.

Energy saving and highly efficient

  • Our newest fan and circulating pump models boast the highest mechanical efficiency in the industry.
  • It can reduce electricity consumption and CO2 emissions.
  • An effective rectification design increases liquid-vapor contact efficiency.
  • Since there are no fillers in the scrubber, there are fewer fan revolutions due to less internal pressure loss.

Stripping Efficiency

GasMolecular FormularWashing LiquidStripping Efficiency
Hydrochloric acidHClH2O80%
Hydrofiuoric acidHFH2O80%
AmmoniaNH3H2SO490%
Sulfur DioxideSO2NaOH50%
Chlorine GasCl2NaOH10%
Sulfuric acid mistH2SO4H2O80%
Chromic acid mistCrO3H2O80%

“*The stripping efficency rate for each gas lisled above ls calculated on the basis of a gas density of 50ppm.
*In the case of water washing, performance may vary according to the supply rate of clean water.
*Further, in the case of NaOH liquid washing, pelformance may vary according to the density of NaOH”

Standard Specifications Common to Series TRS

Standard MaterialsMain body, tank: FRP (polyester resin + glass fibers) Packing, mist catcher: hard vinyl chloride
Standard ColorsScrubber, tank: Munsell N-7 Fan : Munsell 2.5G6/3
Scrubber Pressure LossApproximately 1.2-2.4 inchH2O
Noise Level78dB(A)-81dB(A) At a distance of 1m from equipment.
Specially Designed ModelFor HF gas, Cl2 gas, chromic acid mist and solvents. For gases processed at high temperatures.
OptionsInspection trap, ventilator, damper, vibration-proof coupling, pH rneter, level rneter.
Get a Quote